Painting & Finishing

A comprehensive range of finishes

Armorduct offer a wide range of products with a selection of finishes to suit both indoor and outdoor installations.
From aesthetic considerations to withstanding aggressive or corrosive environments we can recommend the best finish for you

ALI: Aluminium

Available for Dado, Skirting and Flush Floor Trunking

Please add /ALI to your part number

BR: Brass

to standard ASTM B121 / B121M-16

Recommended for internal decorative light duty floor solutions. Antique Brass also available, please use /ABR

Available for Cavity & Screed Floor Boxes

Please add /BR to your part number

BZP: Bright Zinc Plate

to standard BS 10244-2

Standard finish available for Cable Basket

Please add /BZP to your part number

CPC: Clear Polyester Coated

Meets the full requirements of BS6496/7.

Clear Polyester Coating is recommended for use in both interior and exterior applications. It is established as an alternative to the traditional post-galvanising process

Uses of CPC finish include installation in corrosive atmospheres such as chemical plants, battery rooms, marine environments or general outside use where post galvanised or stainless steel systems have been commonly specified in the past. In such installations, CPC offers a more cost effective solution when combining the factors of mechanical performance, ease of installation and endurance

Please add /CPC to your part number

PC: Powder Coated

to standard BS EN 13438: 2013

Recommended for interior use although the extra coating in conjunction with the galvanising process does make it non corrosive to a higher standard than the basic PG. You can select your finish in a BS or RAL colour number. Great solution when you have aesthetic considerations. Standard white RAL colour is 9003 unless otherwise stated Available for Basket, Tray, Cable Trunking, Lighting Trunking, Floor boxes, Aluminium and Dado Skirting Please add /PC to your part number

HDG: Hot Dipped Galvanised

to standard EN ISO 1461

Recommended for both indoor and outdoor installation and especially more aggressive and corrosive conditions

Available for Basket, Tray & Trunking. All HDG trunking is only available in 2m lengths

Please add /HDG to your part number

MAG: Magnelis

Complies to BS EN 10346: 2015

An innovative metallic coating that offers protection in the harshest environments

Contact us for results of our 1000 hour salt test

Available for Cable Trunking and Cable Tray

Please add /MAG to your part number

PG: Pre-Galvanised

to standard BS EN 10346: 2015& DX51Z-275MAC

Recommended for non corrosive interior installation i.e data centres

Available for all Trunking, Tray, Basket

Please add /PG to your part number

SS: Stainless Steel

grade to standard BS EN 10088-2: 2014

Recommended for external use, food or chemical areas. 304 or 316 available (except floor boxes – only 304). You will be supplied 304 unless otherwise stated Available for Basket, Tray, Cable Trunking, Conduit, Conduit Fittings and Floor Boxes Please add /SS to your part number

LSF: Low Smoke Fume

Only available in PC or CPC finishes

With increased demand for safety in public areas and buildings, contractors are being advised to install materials that are less hazardous to members of the public in the case of a fire. Low smoke and fume protection houses fewer plastics, reducing risk by releasing less smoke and poisonous fumes.

/AB Antique Brass

Manufacturing the Difference

Call the sales team on 01384 233 445